0345 899 1000


Installation

0345 899 1000

Installation  Installation  Installation  Installation

Installation

Installation

 

All sheet products can be fixed directly to the wall substrate ie brickwork,blockwork, existing ceramics, plywood, plasterboard and all wet areas. All surfaces must be sound, dry, clean and free from grease. Cut the sheet as required ensuring you have a suitable expansion joint on all abutments and pipework.

Apply Simplyfix 65 or 80 (a 2 part polyurethane adhesive) to the back of the sheet ensuring 100% cover. Use a 3mm square notched trowel over a smooth flat surface or a 6mm square notched trowel over rough surfaces or ceramic tiles.

If using a 3mm trowel coverage rates are one x 6.5kg unit per two 2.5m sheets (one X 8.0kg unit per two 3.05m sheets) or one unit per sheet if using the 6mm square notched trowel. Affix the sheet and roll with a light weight roller, slowly and deliberately to obtain a good transfer of the wet adhesive and to expel any trapped air. To stop the sheet from dropping use mechanical fixings under the bottom of the sheet.

All sheet materials once delivered to site must be stored flat and allowed to acclimatise at the ambient room temperature (min 5°C ) for 24 hours prior to installation.

 

Installation Training

If you have fitters who need training in the installation of SimplyClad hygienic wall cladding, we have a one day beginners course at our training school.

The course is run by an experienced and professional cladding installer with many years experience in the industry. The course offers an introduction to wall cladding systems, profiles, adhesives and tools.

This is a hands on training day in templating, cutting, installation, thermoforming and welding.

 

Book here

Installation

Installation

 

All sheet products can be fixed directly to the wall substrate ie brickwork,blockwork, existing ceramics, plywood, plasterboard and all wet areas. All surfaces must be sound, dry, clean and free from grease. Cut the sheet as required ensuring you have a suitable expansion joint on all abutments and pipework.

Apply Simplyfix 65 or 80 (a 2 part polyurethane adhesive) to the back of the sheet ensuring 100% cover. Use a 3mm square notched trowel over a smooth flat surface or a 6mm square notched trowel over rough surfaces or ceramic tiles.

If using a 3mm trowel coverage rates are one x 6.5kg unit per two 2.5m sheets (one X 8.0kg unit per two 3.05m sheets) or one unit per sheet if using the 6mm square notched trowel. Affix the sheet and roll with a light weight roller, slowly and deliberately to obtain a good transfer of the wet adhesive and to expel any trapped air. To stop the sheet from dropping use mechanical fixings under the bottom of the sheet.

All sheet materials once delivered to site must be stored flat and allowed to acclimatise at the ambient room temperature (min 5°C ) for 24 hours prior to installation.

 

Installation Training

If you have fitters who need training in the installation of SimplyClad hygienic wall cladding, we have a one day beginners course at our training school.

The course is run by an experienced and professional cladding installer with many years experience in the industry. The course offers an introduction to wall cladding systems, profiles, adhesives and tools.

This is a hands on training day in templating, cutting, installation, thermoforming and welding.

 

Book here

Request a quote today

Contact our friendly team for more product and
installation advice.

 

Trade Resources

© Copyright 2016 STS Flooring Distributors LTD    |   Privacy Policy   |   Terms & Conditions   |   Web & SEO by 123 Internet Group

© Copyright 2016 STS Flooring Distributors LTD    |   Privacy Policy   |   Terms & Conditions   |   Web & SEO by 123 Internet Group